Table of Contents
Advertisement
3)
Press as to select [OSD COLOR].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[1]
[2]
[3]
[4]
[5]
[6]
Setting [OSD MEMORY]
Set hold for the position of the menu screen (OSD) cursor.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [OSD MEMORY].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f Even if [ON] is set, the cursor position is not maintained when the power is turned off.
Setting [INPUT GUIDE]
Set whether to display the input guide in the position set in [OSD POSITION].
The input guide is the screen to display the information such as currently selected input terminal name, signal
name, memory number.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [INPUT GUIDE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Setting [WARNING MESSAGE]
Set the display/hide of the warning message.
1)
Press as to select [ON-SCREEN DISPLAY].
2)
Press the <ENTER> button.
f The [ON-SCREEN DISPLAY] screen is displayed.
3)
Press as to select [WARNING MESSAGE].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
100 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Sets to yellow.
Sets to blue.
Sets to white.
Sets to green.
Sets to peach.
Sets to brown.
Holds the cursor position.
Does not hold the cursor position.
Displays the input guide.
Hides the input guide.
Advertisement
Table of Contents
