Table of Contents
Advertisement
3)
Select and assign a program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. "- - -" indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
1)
Press as to select [SCHEDULE].
2)
Press qw to select [ON], and press the <ENTER> button.
f The [SCHEDULE] screen is displayed.
3)
Press as to select [PROGRAM EDIT].
4)
Press qw to select a program number, and press the <ENTER> button.
5)
Press as to select a command number, and press the <ENTER> button.
f You can change the page using qw .
6)
Press asqw to select [TIME], and press the <ENTER> button.
f The projector is in the adjustment mode (the time is blinking).
7)
Press qw to select "hour" or "minute", and press as or the number (<0> - <9>) buttons to set a
time, and then press the <ENTER> button.
8)
Press asqw to select [COMMAND].
9)
Press the <ENTER> button.
f The [COMMAND] detailed screen is displayed.
10) Press as to select a [COMMAND].
f For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time
you press qw .
f When [INPUT] is selected, press the <ENTER> button, and then press asqw to select the input to be
set.
[COMMAND]
[POWER ON]
[STANDBY]
[QUICK STARTUP]
[SHUTTER]
[INPUT]
[OPERATING MODE]
[IN STANDBY
MODE(AUDIO)]
[VOLUME]
*1 When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100G, ET-YFB200G) is connected to the projector, its input
name is automatically reflected from [INPUT1] to [INPUT10]. When an item that does not reflect the input name is selected, it will be disabled.
118 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Detailed settings of
[COMMAND]
―
―
[ON]
[OFF]
[OPEN]
[CLOSE]
[COMPUTER]
[HDMI1]
[HDMI2]
[DIGITAL LINK]
[INPUT1] - [INPUT10]
[NORMAL]
[ECO]
[QUIET]
[USER]
[OFF]
[ON]
[0] - [63]
Switches on the projector.
Enters standby.
Enables the function of the [PROJECTOR SETUP] menu → [ECO
MANAGEMENT] → [QUICK STARTUP].
Disables the function of the [PROJECTOR SETUP] menu → [ECO
MANAGEMENT] → [QUICK STARTUP].
Disables the shutter function (shutter: open).
Enables the shutter function (shutter: closed).
Switches the input to COMPUTER.
Switches the input to HDMI1.
Switches the input to HDMI2.
Switches the input to DIGITAL LINK.
Switches the input to DIGITAL LINK, and switches the input of the
*1
DIGITAL LINK output supported device to the specified input.
Prioritizes luminance.
Controls the power to increase the life of the light source although
the luminance is lower than that of [NORMAL].
Prioritizes the operation with less noise although the luminance is
lower than that of [NORMAL].
Controls the power with the setting set in [USER].
Stops the audio output during standby.
Outputs the audio during standby.
Sets the volume.
Description
Advertisement
Table of Contents
