Table of Contents
Advertisement
[NETWORK SECURITY]
Perform the setting to protect the projector from an external attack or abuse via LAN.
[COMMAND PROTECT]
Perform the setting regarding connection authentication when using the command control function.
1)
Press as to select [NETWORK SECURITY].
2)
Press the <ENTER> button.
f The [NETWORK SECURITY] screen is displayed.
3)
Press qw to switch the [COMMAND PROTECT] setting.
[ENABLE]
[DISABLE]
f The confirmation screen is displayed when the setting is switched.
4)
Press qw to select [OK], and press the <ENTER> button.
f The [COMMAND PROTECT] screen is displayed.
5)
Press as to select [USER NAME], and press the <ENTER> button.
f The [USER NAME] screen is displayed.
6)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the user name of the administrator account.
7)
After the user name is entered, press asqw to select [OK], and press the <ENTER> button.
f The [COMMAND PROTECT] screen is displayed.
8)
Press as to select [PASSWORD], and press the <ENTER> button.
f The [PASSWORD] screen is displayed.
9)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Enter the password of the administrator account.
10) After the password is entered, press asqw to select [OK], and press the <ENTER> button.
f The [COMMAND PROTECT] screen is displayed.
11) Press asqw to select [OK], and press the <ENTER> button.
Note
f When [COMMAND PROTECT] is set to [DISABLE], the projector becomes vulnerable against a threat on the network because connection
authentication will not be performed. Use this function by understanding the risk.
f When a password is not set for the administrator account (when blank), [COMMAND PROTECT] cannot be set.
f For details on how to use the command control function, refer to "Control commands via LAN". (x page 256)
[NETWORK CONTROL]
Set the controls of the projector via the network.
f To use the network function with the projector, it is necessary to set the password of the administrator account.
(x page 169)
1)
Press as to select [NETWORK CONTROL].
2)
Press the <ENTER> button.
f The [NETWORK CONTROL] screen is displayed.
3)
Press as to select an item, and press qw to change the setting.
[WEB CONTROL]
[COMMAND CONTROL]
172 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Connects to the projector in protect mode.
Connection authentication is performed using the user name and password of the administrator
account.
Connects to the projector in non-protect mode.
Connection authentication is not performed.
Set to [ON] to control with the web browser.
Set to [ON] to control with the <SERIAL/MULTI SYNC IN>/<SERIAL/MULTI SYNC OUT> terminal
control command format (x page 259). Refer to "Control commands via LAN" (x page 256).
Advertisement
Table of Contents
