Specifications - Panasonic PT-FRQ60 Operating Instructions Manual

Hide thumbs Also See for PT-FRQ60:
Table of Contents

Advertisement

Specifications

The specifications of the projector are as follows.
Display system
Size of effective display
area
Display
device
Number of pixels
Supplied projection
lens
Projection
Zoom
lens
Focus
Lens shift
Changeable lens
Light source
Screen size
Light output
*2
Contrast ratio
*2
Center to corner zone ratio
*2
Displayable
Horizontal
scanning
Vertical
frequency
HDMI signal input
Input
DIGITAL LINK signal
compatibility
input
COMPUTER signal
input
*1 Image cannot be displayed with this resolution when the input signal is in resolution other than 1 080/120p and 1 920 x 1 080/240.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
Chapter 7  Appendix — Specifications
DLP chip x 1, DLP projection system
16.5 mm (0.65") (aspect ratio 16:9)
2 073 600 pixels
(1 920 x 1 080 dots)
8 294 400 pixels
(3 840 x 2 160 dots)
Throw ratio: 1.5 to 2.9:1
F = 2.0 to 3.4
f = 21.5 mm to 43.0 mm
Manual
Manual
Manual (Horizontal/Vertical)
No
Laser diode
1.02 m (40") to 7.62 m (300")
PT-FRQ60
6 000 lm
PT-FRQ50
5 200 lm
PT-FRQ60
4 800 lm
PT-FRQ50
4 100 lm
20 000:1
90%
27 kHz to 291.6 kHz
24 Hz to 240 Hz
Video signal resolution:
480/60p, 576/50p to 4 096 x 2 160/60p
Computer signal resolution:
640 x 480 to 2 560 x 1 600 (non-interlace)
Dot clock frequency:
25 MHz to 594 MHz
Video signal resolution:
480/60p, 576/50p to 4 096 x 2 160/60p
Computer signal resolution:
640 x 480 to 2 560 x 1 600 (non-interlace)
Dot clock frequency:
25 MHz to 297 MHz
Video signal resolution:
480/60p, 576/50p to 1 920 x 1 080/60p
Computer signal resolution:
640 x 480 to 1 920 x 1 200 (non-interlace)
Dot clock frequency:
25 MHz to 162 MHz
without QUAD PIXEL DRIVE
*1
with QUAD PIXEL DRIVE
when [PICTURE MODE] is set to [DYNAMIC], [DAYLIGHT VIEW]
is set to [OFF], [DYNAMIC CONTRAST] is set to [OFF], and [LIGHT
OUTPUT] is set to [100%]
when [PICTURE MODE] is set to [DYNAMIC], [DAYLIGHT VIEW]
is set to [OFF], [DYNAMIC CONTRAST] is set to [OFF], and [LIGHT
OUTPUT] is set to [80%]
when [PICTURE MODE] is set to [DYNAMIC], [OPERATING
MODE] is set to [NORMAL] and [DYNAMIC CONTRAST] is set to
[1]
ENGLISH - 211

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-frq50

Table of Contents