Using Art-Net Function - Panasonic PT-FRQ60 Operating Instructions Manual

Class Command Control details
Other information
1 INF0?
queries
1 CLSS? Class information query 2
2 SNUM ? Serial number query
2 SVER ? Software version query
Input terminal name
2 INNM?
query
Input signal resolution
2 IRES ?
query
Recommended
2 RRES ?
resolution query
2 SVOL Volume control
FREZ Freeze control
2
FREZ ? Freeze status query
Cooling notification
2 POWR
Warmup notification
2 ERST Error notification
2 LKUP Link up notification
Input switch completion
2 INPT
notification
2 SRCH Projector search
PJLink security authentication
A PJLink password for security authentication is required for PJLink command communication.
The PJLink password can be set from the [NETWORK] menu → [PJLink] → [PJLink PASSWORD] ( x page 144)
or from the [Set up password] page ( x page 176) of the web control screen.
When using the PJLink commands without security authentication, set the PJLink password to blank. The factory
default setting of PJLink password is blank.
f For specifications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/

Using Art-Net function

Since the network function of the projector supports the Art-Net function, you can control the projector settings
with the DMX controller and application software using the Art-Net protocol.
Note
f Setting the password of the administrator account ( x page 140) is required for using the Art-Net function of the projector.
200 - ENGLISH
Chapter 7 Appendix — Technical information
Parameter/
response string
xxxxx
xxxxxxxxx Returns serial number.
xxxxxxxxx Returns version number.
11 / COMPUTER
31 / HDMI1
32 / HDMI2
33 / DIGITAL LINK
AAAA: Horizontal resolution
AAAAxBBBB
BBBB: Vertical resolution
Returns display resolution.
3840 x 2160
3840 x 2160: with QUAD PIXEL DRIVE
1920 x 1080
1920 x 1080: without QUAD PIXEL DRIVE
0 Decrease the volume.
1 Increases the volume.
0 Freeze clear
1 Freeze (stop)
0 Notifies when the power is turned off.
1 Notifies when the power is turned on.
xxxxxx Notifies when an error occurs.
Notifies the MAC address when the PJLink communication becomes
xx:xx:xx:xx:xx:xx
possible.
11
31
32
33
The projector connected to the same network that can communicate
ACKN=xx:xx:xx:xx:xx:xx
with PJLink will respond with its MAC address.
Returns the main version of the firmware.
Returns class for PJLink.
Returns input terminal name.
COMPUTER
HDMI1
HDMI2
DIGITAL LINK
Remark