Quicksilver 905WE Owner's Manual page 64

Quicksilver 905WE — System & Component Overview and Operation
available under both seat bases. The forward seat base articulates and the removable backrest allows
for multiple seating configurations.
Located on the port side, there is a folding seat that increases the amount of seating options at the
dinette. To use, simply pull the seat base and rotate it 90 degrees. Located on the center of the
forward and aft seat bases, there is a rotating support ledge used to lock the port seat base into place.
Rotate the support ledge 180 degrees and rest the port dinette seat base on the ledge.
To install the table, push and lock the table leg into the base plate. Next, place the table onto the table
leg. The table is hinged to all easy access to the seating. When not in use, the table and table leg is
stored in the forward berth storage area under the mattress.
To convert to a sleeping berth, first remove the table and table leg. Next rotate the port dinette seat
to the up position. Now, install the filler board by folding down the support legs on the bottom of the
filler board and placing the board next the port seat base. When not in use, the filler board is stored in
the forward berth storage area under the mattress.
Interior Dinette
Aft Facing Position
Table
Forward Facing Position
52
Forward seat base
Forward seat storage
Aft seat base
Aft seat storage
Dinette table
Table leg
Table base
Port dinette seat
Filler board
Filler cushion
Sleeping Berth