Stern Anchor Windlass (Optional) - Quicksilver 905WE Owner's Manual

Quicksilver 905WE — System & Component Overview and Operation
reset the breaker and it continues to trip, have your authorized Quicksilver® dealer inspect the
system.
In order to manually operate the windlass and lower the anchor into the water, insert the emergency
handle (provided by the windlass manufacturer) into the star socket located at the top of the gypsy
cover and turn counter-clockwise. This loosens the clutch holding the anchor rode and chain in place
and allows the anchor to be deployed into the water. The speed of the rode can be adjusted by
turning the handle clockwise. To re-engage the clutch and lock the rode from moving, turn the handle
clockwise.
To manually raise the anchor, loosen the clutch by turning the handle counter-clockwise, and pull the
anchor up into the boat. Make sure to properly feed the rode and chain through the windlass when
pulling up the anchor. When the anchor is up and stowed properly in the bow pulpit, re-engage the
clutch by turning the handle clockwise.

10. Stern Anchor Windlass (optional)

The anchor windlass located at the stern of the boat assists with the anchoring of your boat by
automatically raising and lowering the anchor. The windlass can be operated from the helm or by a
handheld remote control key fob.
Stern Anchor Windlass
Key FOB
Before operating the windlass, make sure that the safely
lanyard is removed from the anchor
Stern windlass
Stern eye
Stern anchor roller
Windlass switch
Windlass breaker
36