Checking Front Axle Oil Level (N1); Checking Front Axle Oil Level (N1) - Kioti NX4520 Manual

checkinG fROnt axle Oil leVel (n1)

(1) oil inlet plug (2) gauge
(a) oil level is acceptable within this range
1. Park the machine on a flat surface,
lower the implement and shut off
engine.
2. Depress the brake pedals and ap-
ply the parking brake.
3. set all shift levers into the neutral
position.
4. stop the engine.
TE130(NX4520,5020,5520,6020)-합본-11 11
TE1O763A
(1) oil Dipstick
(a) upper limit (B) lower limit
5. pull out the oil dipstick, clean it,
and then insert it into its original
position. then, pull it out again and
check if the fuel level is within the
specified range.
6. if the oil level is too low, add some
new oil so that the level is within
the allowable range. (refer to "lu-
brication" in the chapter "service")
iMPORtant
•
When using oil of different
maker or viscosity from the
previous one, remove all of
the old oil. never mix two dif-
ferent types of oil.
•
Wi p e t h e o i l d i p s t i c k w i t h
clean cloth or tissue.
•
never add the oil over the up-
per limit of the tank.
TE1O764A
7
maintenance 11
-
7
2016-03-15 오후 4:38:07