Kioti NX4520 Manual page 182

6
10 nx4520 / nx5020 / nx5520 / nx6020
-
wARNINg
•
Make sure that the PTO safety
cover is in its position before
driving the PTO shaft.
•
The tractor PTO and PTO shaft
should not be interfered by
any surrounding parts.
•
Never go close to the rotating
PTO or tractor PTO shaft. A
severe accident can happen.
•
before driving an implement
through the PTO, always make
sure that all bystanders are
well away from the tractor.
•
when using the PTO drive with
a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
TE130(NX4520,5020,5520,6020)-합본-10 10
wARNINg
•
before starting up any PTO-
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the tele-
scopic section of the drive
shaft is engaged.
•
before starting up any PTO-
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the tele-
scopic section of the drive
shaft is engaged.
(1) pto cover
(A) Allowable angle of universal joint : 50˚
Ref to the chart below as to installing
of an universal joint.
The type of PTO Allowable angle
shaft of universal joint
"
sAe 1-3 / 8 6
50 degree
splines
M55O626A
2016-02-22 오전 8:25:36