Kioti NX4520 Manual page 172

5
0 Nx4520 / Nx5020 / Nx5520 / Nx6020
-
▶DISCONNECTION
1. make sure to stop the engine be-
fore disconnecting it.
2. Release any residual pressure in
the hydraulic hoses of the imple-
ment and tractor by operating the
double acting valve lever 4 to 5
times.
3. R e m o v e a n y f o r e i g n m a t e r i a l
around the couplers.
4. keep the implement balanced by
removing any load applied (low-
ering it onto the ground, for ex-
ample). If disconnecting the hose
while outer load is applied to the
implement, it is hard to connect the
implement in the future.
5. Remove the male coupler by push-
ing the female coupler boss of the
tractor backward.
6. close the dust-proof cover of the
female coupler of the tractor. Wrap
the male coupler of the implement
with a plastic bag to prevent con-
tamination.
TE130(NX4520,5020,5520,6020)-합본-30 30
WARNING
Never. connect. or. disconnect.

the. implement. hydraulic. hose.
while. the. pressure. in. it. is. not.
released. or. the. engine. is. run-
ning..It.is.hard.to.connect.and.
disconnect. the. hose. and. hy-
draulic. fluid. can. be. sprayed.
from. the. hose,. and. get. into.
your.eyes.or.skin.
Stop.the.engine.and.wear.pro-

tective.glasses.and.gloves.be-
fore.work.
2016-02-22 오전 8:25:08