Bluetooth Pair/Unpair
The programmable button can be used to toggle between pairing and unpairing from the host. Scan one of the following
bar codes to set the Bluetooth Pair/Unpair with a short or long press of the programmable button:
Bluetooth Pair/Unpair On -
Short Press
The Bluetooth LED flashes in the following pattern after a short or long press of the programmable button
Disable Programmable Button
To disable the programmable button, scan one or both of the bar codes below. Default = Disable Short and Long Press.
* Disable Short Press
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
LED Indicator
Beeper Indicator
Blue, off
None
Blue flash
None
Blue, on
1 beep
Bluetooth LED
Bluetooth Pair/Unpair On -
Bluetooth Status
Bluetooth connection has not been established
Scanner is attempting to pair with Bluetooth device
Successful Bluetooth pairing
Long Press
* Disable Long Press
4 - 3