Maxicode - Honeywell 1602-B User Manual

codes were created (see
code from the
properly.

MaxiCode

MaxiCode On/Off
MaxiCode Message Length
Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 1-150. Minimum Default = 1, Maximum Default = 150.
Minimum Message Length
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
ISO 2022/ISO 646 Character Replacements
Programming Chart on the inside the back cover of this manual. The data characters should then appear
< Default All MaxiCode Settings >
On
on page A-7), and scan the value and the Save bar
Data Matrix Code Page
Message Length Description
* Off
(page 7-2) for additional
Maximum Message Length
7 - 41