All Symbologies - Honeywell 1602-B User Manual

7
Symbologies
This programming section contains the following menu selections. Refer to

• All Symbologies

• Aztec Code
• China Post (Hong Kong 2 of 5)
• Chinese Sensible (Han Xin) Code
• Codabar
• Codablock A
• Codablock F
• Code 11
• Code 128
• Code 32 Pharmaceutical (PARAF)
• Code 39
• Code 93
• Data Matrix
• EAN/JAN-13
• EAN/JAN-8
• GS1 Composite Codes
• GS1 DataBar Expanded
• GS1 DataBar Limited
• GS1 DataBar Omnidirectional
• GS1 Emulation
• GS1-128
Note: The selections in this User's Guide are dependent on the Voyager 1602g model you have purchased. PDF and 2
dimensional bar codes can only be read by model 1602g2D and cannot be read by model 1602g1D.
All Symbologies
If you want to decode all the symbologies allowable for your scanner, scan the All Symbologies On code. If on the other hand,
you want to decode only a particular symbology, scan All Symbologies Off followed by the On symbol for that particular sym-
bology. Default = All Symbologies Off.
All Symbologies On
Note: Scanner performance may be degraded after scanning All Symbologies On. Only scan All Symbologies On when
needed.
Note: When All Symbologies On is scanned, 2D Postal Codes are not enabled. 2D Postal Codes must be enabled separately.
The HEC and TEC codes identified in this watermark supersede any conflicting HEC or TEC codes displayed in the drawing.
Chapter 9 for settings and defaults.
• Interleaved 2 of 5
• Korea Post
• Matrix 2 of 5
• MaxiCode
• MicroPDF417
• MSI
• NEC 2 of 5
• Postal Codes - 2D
• Postal Codes - Linear
• PDF417
• GS1 DataBar Omnidirectional
• QR Code
• Straight 2 of 5 IATA (two-bar start/stop)
• Straight 2 of 5 Industrial (three-bar start/stop)
• TCIF Linked Code 39 (TLC39)
• Telepen
• Trioptic Code
• UPC-A
• UPC-A/EAN-13 with Extended Coupon Code
• UPC-E0
• UPC-E1
All Symbologies Off
7 - 1