Table of Contents
Advertisement
CHAPTER 1 –
ABOUT THE SF61B CORDLESS SCANNER
TURN ON THE SF61B
To turn the scanner on, press and release the scan button. The SF61B beeps twice and
vibrates at power-up (default behavior).
If your scanner connects or reconnects to a Bluetooth host device / application,
it emits a series of beeps from low to high and the blue Honeywell Ready-to-Work
indicator turns solid blue (default scanner behavior).
PAIR WITH A BLUETOOTH HOST DEVICE
If your SF61B is discoverable (not connecting or not already connected to a Bluetooth
host), you can pair it with a Bluetooth host device and establish a Bluetooth
connection between the two devices (see Chapter 2,
Note: Being discoverable is the default behavior of the SF61B, but you
can use EasySet to make your product not discoverable if you wish
(Interface > Bluetooth > Discoverable > Not discoverable).
CONNECT ON POWER-UP
While the scanner is waiting for a connection, the blue Honeywell Ready-To-Work LED
blinks slowly.
HOST-INITIATED (OUTGOING) SPP CONNECTION
If your scanner is paired with a Bluetooth host device and was connected when it
powered down, you will have to re-establish the connection manually when it powers
up again.
After 5 minutes of inactivity (default behavior, modifiable), it will power down if the
connection is not established.
ALL OTHER CONNECTION TYPES
If your scanner is paired with a Bluetooth host device and was connected when it
powered down, it will automatically try to reconnect at power-up.
After 5 minutes of inactivity (default behavior, modifiable), it will power down if the
connection is not established.
10
Connect the
SF61B).
INACTIVITY SHUTDOWN
PERIOD
By default the SF61B shuts down after
a period of inactivity of 1 hour if it is
connected to a Bluetooth host, and
after 5 minutes of inactivity if it is not
connected.
You can use EasySet to modify these
inactivity timeouts (Operating settings >
Scanning / Triggering > Power down).
User's Guide | SF61 Cordless Scanner
Advertisement
Table of Contents
