Summary of Contents for TBK vision TBK-1016AVH36IRHF
Page 1
All manuals and user guides at all-guides.com Caution TBK-1016AVH36IRHF 3-AXIS GIMBAL VARI-FOCAL IR-LED DAY&NIGHT VANDAL RESISTANT DOME CAMERA This symbol is intended to alert the user to the presence of non insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a USER MANUAL risk of electric shock to persons.
All manuals and user guides at all-guides.com Composition Contents Confirm that the following parts are included: Composition ----------------------------------------------- 4 Features ---------------------------------------------------- 5 Dimensions ------------------------------------------------ 6 Camera DRIVER SERVICE MONITOR CABLE Parts Name and Description --------------------------- 7 Installation -------------------------------------------------- 8 Mounting Housings to Electrical Junction Boxes-- 9 Instruction Manual Accessories Mounting Template...
All manuals and user guides at all-guides.com Features Dimension (Unit: mm) 1/3” SONY Super HAD High-resolution Color CCD 550TVL High-Resolution 2.8~10.5mm Vari-Focal, DC Auto Iris F1.2 Lens Day & Night Lens Built-in Function selection Dip Switch - ICR switching tine, FLK, BLC, AWB Auto switching IR-LED control by photocell - IR LED: 36pcs Built-in DC Iris level adjustment Volume...
All manuals and user guides at all-guides.com Parts Name and Descriptions Installation 1. Remove dome cover by loosening 3 screws. Use supplied Torx wrench. 2. Surface Mount : Use four ST4x38 screws, mount surface plate to a sturdy surface. Use four M4x14 screws, affix flush mount base to surface plate. (For flush mount application, disregard this section.) 3.
All manuals and user guides at all-guides.com Mounting Housings to Electrical Junction Boxes Connections Either flush mount or surface mount application, pre-drilled mounting holes on. Dome housing accommodate various electrical junction boxes, making installation easy and less time consuming. Power connections: Requires DC12V or AC24V input depending on camera model.
Page 6
All manuals and user guides at all-guides.com 3-Axis Gimbal Adjustment Switch & Volume Adjustments 1. Pan: Adjust the first pan angle by returning the gimbal 360˚ degree. (see the figure No.1) 2. Tilt: Adjust the tilt angle by moving the gimal up and down.
All manuals and user guides at all-guides.com Fan & Heater Specifications (Option) Specifications ITEM NTSC Image Sensor 1/3” Interline transfer type color CCD (Sony) Effective Pixels 768H x 494V (380K pixels) 752H x 582V (440K pixels) Scanning System 525 Lines 2:1 Interlace 625 Lines 2:1 Interlace Scanning Frequency 15.734KHz(H), 59.94Jz(V)
Page 8
All manuals and user guides at all-guides.com 3-AXIS GIMBAL VARI-FOCAL IR DAY&NIGHT VANDAL RESISTANT DOME CAMERA MADE IN KOREA...