Table of Contents
Advertisement
Maintenance
The Blade
!
WARNING
• Never touch a rotating blade.
• Check the blade in order to get a good cut. The blade should always be sharp and well
balanced. At regular intervals, check the tightness of all nuts, bolts and screws.
• If the blade hits an obstacle, check for damage and if the machine vibrates badly, stop the
lawnmower and take it to a service dealer.
1
You MUST wear gloves to protect your hands from being cut when working with the blade.
2
The blade is made of pressed steel, in order to obtain a good cut, sharpen the blade frequently,
typically around every 25 hours of work.
3
Following blade sharpening, you must make sure that the blade is always well balanced.
4
To remove the blade, unscrew the centre bolt, check the blade carrier and all components.
Replace if they are worn or damaged.
5
It is best if all interventions on the blade are done at a specialised centre that has the special
tools and equipment.
6
Only original blades must be used on this machine. Given product evolution, the blades may
be replaced in time with others having similar interchangeable and operating safety features.
42
www.hyundaipowerproducts.co.uk
01646 687 880
aftersales@hyundaipowerproducts.co.uk
Advertisement
Table of Contents
