Table of Contents
Advertisement
Assembly
Step 4 : Cable Attachment
NOTE - If stood behind the lawnmower:
OPC Cable : Attaches to the lever in front of the main handlebar if traced, will attach to the engine.
Drive Cable : Attaches to the lever behind the main handlebar and if traced, will enter the deck of
the lawnmower behind the engine.
1
Follow the cable you want to
attach and determine which
lever it will attach to.
4
Position the cable until it lies
flat in the lever.
28
www.hyundaipowerproducts.co.uk
2
Gently prise the lever inwards
from its locating hole in the
main handlebar.
5
Refit the lever back into its
location hole on the main
handlebar.
01646 687 880
3
Insert the end of the cable in to
the location hole on the lever.
6
Check the cable lies flat and
has not snagged on any other
part of the lawnmower.
aftersales@hyundaipowerproducts.co.uk
Advertisement
Table of Contents
