Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hyundai HYM430SPER
Summary of Contents for Hyundai HYM430SPER
- Page 1 PETROL ROLLER LAWNMOWER HYM430SPER Instruction Manual...
- Page 2 USING THE MACHINE. Keep for future reference and pass it on if the machine is loaned or sold to another user. This manual has been produced by Hyundai Power Products and should be kept with the product. Please read and understand these instructions before you use your product. Failure to do this may result in personal injury or damage to the product.
-
Page 3: Table Of Contents
Contents Safety Information.....4-19 Maintenance......38-47 Maintenance Safety........38 Understand Your Machine.......4 Checking Your Machine.........38 Personal Safety..........5 Cleaning............39 Inspect Your Machine........6 Transportation..........39 Work Area............7 Storage............40-41 During Use............8-9 Blade Maintenance........42 Engine Safety..........10 Air Filter............43 Carbon Monoxide...........11 Spark Plug.............44 Fuel Safety..........12-13 Changing / Draining Oil........45 Batteries............14 Fuel And Carburetor........45 Electrical Safety..........15... -
Page 4: Safety Information
Safety Information Safety No list of safety guidelines can be complete. Every environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery with caution and respect. Failure to do so could result in serious injury, damage to equipment, or poor work results. -
Page 5: Personal Safety
Safety Information Personal Safety • WARNING! Never allow children or people unfamiliar with these instructions to use the product. Local regulations can restrict the minimum age of the operator. • Keep children, pets, and other people not using the unit away from the work area (at least 15m). -
Page 6: Inspect Your Machine
Safety Information Inspect Your Machine • Check your machine before starting it. Keep guards in place and in working order. Make sure all nuts, bolts, etc., are securely tightened. • You must check the general condition of the machine before use. •... -
Page 7: Work Area
Safety Information Work Area • Make sure you thoroughly inspect the entire work area and remove all objects and anything that could be thrown by the machine or could damage the engine or machine (branches, stones, wire, toys, etc). Attempting to clear the work area whilst using the machine will reduce your concentration and creates a trip hazard. -
Page 8: During Use
Safety Information During Use • Always hold the unit with both hands when operating. Keep a firm grip on the handlebars. Be aware that the machine may unexpectedly bounce upward or jump forward if the machine should strike buried obstacles such as large rocks or roots. •... - Page 9 Safety Information During Use (Continued) • You must disengage the blade, switch off the engine and unplug the spark plug cable (making sure that all moving parts are stationary): - Before refuelling. - Before adjusting the cutting height. - After striking a foreign object, you must inspect the machine for damage and make repairs before using it again.
-
Page 10: Engine Safety
Safety Information Engine Safety • This machine is equipped with an internal combustion engine. Do not use on, or near, forest-covered or brush-covered land unless the exhaust system is equipped with a spark arrester meeting applicable local, state, or federal laws. •... -
Page 11: Carbon Monoxide
Safety Information Carbon Monoxide DANGER! Engine exhaust fumes contain Carbon Monoxide. This is a poisonous gas and can kill in minutes. NEVER use inside a building or in an area with poor ventilation. NEVER use inside a confined space, such as but not limited to a house, garage, vehicle, boat or tent. ONLY use outside and far away from windows, doors and vents. -
Page 12: Fuel Safety
Safety Information Fuel Safety CAUTION! ALL FUELS ARE HIGHLY FLAMMABLE AND PETROL VAPOUR IS EXPLOSIVE. TAKE EXTREME CARE WHEN HANDLING FUEL. KEEP FUEL OUT OF REACH OF CHILDREN. General Safety General Safety • Do not smoke each time fuel is handled. •... - Page 13 Safety Information Fueling / De-Fueling • ALWAYS fuel and de-fuel in a well ventilated area outside of buildings. Use a funnel to add fuel, only outdoors. Do not smoke during this and each time fuel is handled. • Add fuel before igniting the engine, never remove the fuel tank cap or add fuel whilst the engine is running or when it is hot.
-
Page 14: Batteries
Safety Information Batteries (Where Present) Batteries present a risk if they become damaged by the possible leaking of electrolyte. This electrolyte is an acid and can cause serious burn injuries. Care should be taken when working on or near them. NOTE the electrolyte may be in a liquid or gel form. Should you come in to contact with electrolyte you should;... -
Page 15: Electrical Safety
Safety Information Electrical Safety (Where Applicable) DANGER! ELECTRICITY CAN KILL - NEVER WORK ON LIVE/ENERGISED EQUIPMENT. • Prior to carrying out any maintenance work you MUST identify electrical isolation methods and isolate all electrical supplies. • Prior to use and with all electrical supplies isolated, you MUST check all electrical cables, plugs and connectors for the following;... -
Page 16: Vibrations
Safety Information Vibrations (Where Applicable) • Prolonged use of hand held (operated) machines will cause the user to feel the effects of/from vibrations. These vibrations can lead to white finger (Raynaud’s phenomenon) or carpal tunnel syndrome. This condition reduces the ability of the hand to feel and regulate temperature, causing numbness and heat sensations and may cause nerve damage and circulatory tissue death. -
Page 17: Personal Protective Equipment
Safety Information Personal Protective Equipment Appropriate Personal Protective Equipment (PPE), MUST be worn at all times when operating or repairing the machine. No protective equipment can ensure 100% protection. When selecting PPE, make sure it’s CE marked and it suits the user in terms of size, fit, etc. If more than one item of PPE is worn at the same time, make sure they can be used together, e.g. -
Page 18: Intended Use
Safety Information Intended Use The HYM430SPER is a petrol powered rear roller, self-propelled, electric push button start lawnmower from HYUNDAI, ideally suited for small to medium sized lawns. The HYM430SPER has a cutting width of 420mm and is powered by a 139cc 4-stroke OHV petrol engine. -
Page 19: Symbols On The Machine
Safety Information Symbols On The Machine We have provided safety messages in this manual and on the machine. This information alerts you to potential hazards that could hurt you or others. Please read these messages carefully. However, we may not have listed all of the possible hazards, you must also use your own judgment. -
Page 20: Features
Features HYM430SPER Features www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk... - Page 21 Features HYM430SPER Features Upper Handle Hold onto with both hands this whilst using the machine. Operator Presence Control (OPC) Lever This is a safety feature. The machine will stop if you let go of this lever. Self Propelled Lever Propels the machine forward. All you have to do is control the path the machine takes.
-
Page 22: Unboxing
Lay the contents out and check them. If any part is damaged or missing, you must not use the machine. Contact HYUNDAI Power Products immediately. You must keep the packaging material in case the machine needs to be returned or repaired. -
Page 23: Assembly
Assembly Assembly Safety CAUTION - This guide is meant to serve as a quick reference for operating your HYUNDAI machine. We always advise reading the manual in full before operation. CAUTION - For OUTDOOR use ONLY. Petrol machines produce carbon monoxide –... -
Page 24: Assemble Handlebars
Assembly Unboxing & Assembly Video: Go to youtube.com and type in Hyundai HYM430SPER assembly. YOU MUST read and understand the instruction manual first. Step 1 : Assemble Handle Bars You will need a 13mm spanner or an adjustable spanner for assembly. - Page 25 Assembly Attach the upper handle to the lower handle and tighten the quick release handle bolts securely. See image 5 & 6. Slowly pull the recoil start handle up to the cord loop on the handlebar. See image 7 & 8. Image 5 Image 6 Image 7...
-
Page 26: Grass Collector Assembly
Assembly Step 2 : Grass Collector Assembly Slot the metal pole into the plastic parts around the grass collector. www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk... -
Page 27: Attaching Grass Collector
Assembly Step 3 : Attaching Grass Collector Lift the rear discharge flap. Lift the back end of the grass collector up high to get the front hooks over the bars. Lower the rear discharge flap so it rests on the grass collector. These are the The hooks on the grass 2 hooks that will secure the grass... -
Page 28: Cable Attachment
Assembly Step 4 : Cable Attachment NOTE - If stood behind the lawnmower: OPC Cable : Attaches to the lever in front of the main handlebar if traced, will attach to the engine. Drive Cable : Attaches to the lever behind the main handlebar and if traced, will enter the deck of the lawnmower behind the engine. -
Page 29: Cable Clip
Assembly Step 5 : Cable Clips Use the plastic cable clips to attach the cables to the handlebars. aftersales@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk 01646 687 880... -
Page 30: Preparation
Preparation Adding Oil Oil Type : SAE 30 or 15w40 Engine Oil Oil Capacity : 600ml NOTE - The machine is delivered without oil in the engine. All machines are tested and inspected so there may be some residual oil left in the machine so please fill with caution. Remove the oil filler cap. -
Page 31: Adding Fuel
Preparation Adding Fuel Make sure you read the fuel safety before handling fuel. Fuel Type : Fresh Straight Unleaded Petrol Fuel Capacity : 1L NOTE - The machine is delivered without petrol. All machines are tested and inspected so there may be some residual petrol left in the machine so please fill with caution. -
Page 32: Operation
Operation Cutting Height Adjustment Make sure the engine is off. Pull the adjustment lever outwards and select the required height. The height is automatically adjusted for all wheels. This is the lowest height setting. This is the highest height setting. www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk... -
Page 33: General Mowing Tips
Stripes look best on a healthy and bright lawn. If your lawn is looking tired and dull, we recommend using a HYUNDAI Lawn Scarifier and Aerator. Scarification is the removal of moss, lawn clippings and dead grass blades from the stem of the grass to maintain a healthy growing environment. -
Page 34: Starting / Stopping
Starting Procedure YOU MUST read and understand the full safety instruction manual before starting the machine. CAUTION - For OUTDOOR use ONLY. Petrol machines produce carbon monoxide – poisonous, colourless and odourless gas that can cause serious injury or death. Petrol is highly flammable, always handle with extreme care and in a well ventilated area. - Page 35 Starting Procedure Electric Start Make sure the blade is free of long grass and the cutting height is set to the highest setting. From cold, pump the primer bulb 5 times. You do not need to do this for warm start. (Warm start is when the machine has been turned off for less than 15-20 minutes).
- Page 36 Starting Procedure Recoil Start Make sure the blade is free of long grass and the cutting height is set to the highest setting. From cold, pump the primer bulb 5 times. You do not need to do this for warm start. (Warm start is when the machine has been turned off for less than 15-20 minutes).
- Page 37 Stopping Procedure Stopping CAUTION - The engine and exhaust will remain hot for a while after use. Ensure the engine and exhaust has cooled before carrying out any maintenance, refuelling or storage. Before stopping the machine, you must allow the engine to idle for 30 seconds. You do not need to do this if you need to emergency stop the engine.
-
Page 38: Maintenance
Maintenance Maintenance Safety IMPORTANT - Routine and accurate maintenance is essential for maintaining original machine safety and performance levels. WARNING - Before cleaning or doing maintenance work, you need to stop the engine, disconnect the spark plug cable and read the relevant instructions. You need to wear proper clothing and protective gloves whenever your hands are at risk. -
Page 39: Cleaning
Maintenance Cleaning CAUTION - DO NOT use a hose pipe or pressure washer to clean the engine. Water can damage the engine or contaminate the fuel system. NOTE Engine must be switched off and spark plug lead disconnected. After Each Use •... -
Page 40: Storage
Maintenance Storage Where To Store Store in a cool, dry place away from sources of ignition and varying changes in temperature. Store on a flat and level surface with all wheels on the ground. DO NOT stack other items on top of the machine when in storage. Store the machine in a safe place, out of the reach of children or anyone who is not familiar with operation. - Page 41 Maintenance Long Term Storage If storing the machine for a period of 30 days or more, you must follow proper storage and winterisation guidelines to avoid any possible issues with the machine. Incorrect storage can lead to possible fueling or engine issues that will not be covered by the warranty. Allow the engine to fully cool down.
-
Page 42: Blade Maintenance
Maintenance The Blade WARNING • Never touch a rotating blade. • Check the blade in order to get a good cut. The blade should always be sharp and well balanced. At regular intervals, check the tightness of all nuts, bolts and screws. •... -
Page 43: Air Filter
Maintenance Air Filter CAUTION - A dirty air filter will restrict the air flow to the carburettor, which will reduce engine efficiency. When using the machine in very dusty areas you must clean or replace the air filter more often. Never operate the machine without the air filter being fitted it can cause damage to the engine which is not covered by warranty. -
Page 44: Spark Plug
Maintenance Spark Plug For good performance, the spark plug must be properly gapped and free of deposits. You MUST allow the engine to cool down before carrying out any maintenance. Always use the correct spark plug. To check the spark plug, remove the spark plug HT lead cap and remove the spark plug with the spark plug wrench. -
Page 45: Changing / Draining Oil
Maintenance Changing / Draining Oil To reduce fire hazards, check there is no oil and/or fuel leaks on a regular basis. It is highly recommended to change the engine oil every 100 hours or 12 months. This will ensure the machine will function properly over time. There are different ways you can empty the oil: •... -
Page 46: Opc Cable Adjustment
Maintenance OPC Cable Adjustment NOTE - If there is more than 10mm movement in the OPC lever before the cable begins to move, then the OPC cable will require adjustment. It is necessary as part of routine maintenance to adjust the OPC cable tension to ensure the lawnmower will start correctly. Follow the OPC cable to the adjuster located on the side of the engine. -
Page 47: Drive Cable Adjustment
Maintenance Drive Cable Adjustment NOTE - If there is more than 10mm movement in the drive lever before the cable begins to move, then the drive cable will require adjustment. It is necessary as part of routine maintenance to adjust the drive cable tension to ensure the lawnmower will self-propel correctly. -
Page 48: Troubleshooting
Troubleshooting Possible Cause Problem Possible Solution OPC cable not adjusted correctly. Adjust OPC cable. Fuel tank is empty. Fill fuel tank. Stale petrol. Drain carburetor float bowl. Engine does Clean or replace air filter. Air filter element is dirty. not start Spark plug is loose. -
Page 49: Technical Data
Technical Data Specifications Model HYM430SPER Engine Type HYUNDAI IC140VE, 4-Stroke OHV Single Cylinder Engine Size 139cc Rated Power 2.6kW Max. Engine Speed 2800rpm Fuel Tank Capacity & Fuel Type 1L Straight Unleaded Petrol Oil Capacity & Oil Type 600ml SAE30 or 15W40 Start Method Recoil Start &... -
Page 50: Spare Parts
Spare Parts Ordering Spare Parts Only use original spare parts: The use of non-original and/or incorrectly fitted parts will jeopardise the safety of the machine, may cause accidents or injuries for which the manufacturer is under no circumstance liable or responsible. Find the part you are looking for in the drawings. - Page 51 Spare Parts Drawing B Drawing C www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk...
- Page 52 Spare Parts Drawing D www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk...
- Page 53 Spare Parts Drawing E Drawing F www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk...
- Page 54 Spare Parts Drawing A Drawing Number Spare Part Name Part Number HYM430SPER-A1 Clutch Lever 1290032 HYM430SPER-A2 Brake Lever 1001001 HYM430SPER-A3 Limiting Stopper 1290002 HYM430SPER-A4 Foam Pipe 1290003 HYM430SPER-A5 Upper Handle 1137005 HYM430SPER-A6 Cable Fixing Clamp 1290034 HYM430SPER-A7 Brake Cable 1149007...
- Page 55 Spare Parts Drawing C Drawing Number Spare Part Name Part Number HYM430SPER-C1 139V Engine 1137030 HYM430SPER-C2 Screw Cap 1290042 HYM430SPER-C3 Belt Cover 1288036 HYM430SPER-C4 Bolt 1149046 HYM430SPER-C5 Screw 1290044 HYM430SPER-C6 Flat Washer 1288086 HYM430SPER-C7 Flat Key 1149047 HYM430SPER-C8 Blade adapter...
- Page 56 Spare Parts Drawing D (Continued) Drawing Number Spare Part Name Part Number HYM430SPER-D22 Charger 1149086 HYM430SPER-D23 Cable Wire 1149087 HYM430SPER-D24 Bolt 1149088 HYM430SPER-D25 Upper Cover 1149089 HYM430SPER-D26 Battery 1149090 Drawing E Drawing Number Spare Part Name Part Number HYM430SPER-E1 Roller Shaft...
- Page 57 Spare Parts Drawing E (Continued) Drawing Number Spare Part Name Part Number HYM430SPER-E26 Fixing Shaft Sleeve Assy 1148115 HYM430SPER-E27 Block Ring 1290105 HYM430SPER-E28 Small Chain Wheel 1148117 HYM430SPER-E29 Precursor Axle Assy 1138083 HYM430SPER-E30 Precursor Half Axle 1290118 HYM430SPER-E31 1290064 HYM430SPER-E32...
-
Page 58: Recycling And Disposal
Recycling And Disposal Recycling And Disposal We do not offer a takeback scheme for the recovery of Waste Electrical Electronic Equipment (WEEE) & Batteries. Instead the responsibility to dispose of WEEE and/or Batteries is passed onto you by us. So when it becomes necessary to dispose of your machine you must take it to your local Civic Amenity Site. -
Page 59: Declaration Of Conformity
98dB(A) 2800 Product Details Brand: Hyundai Model: HYM430SPR, HYM430SPER, HYM480SPR, HYM480SPER, HYM530SPR, HYM530SPER Description: Petrol lawnmower with rear roller. Name and address of technical documentation holder and EU distributor: Genpower Ltd, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW, UK. Signed by:... -
Page 60: Useful Information
Go to www.hyundaisupport.co.uk or search ‘Hyundai Power Products’ in YouTube. Warranty Proof of purchase will be required before you make a warranty claim. Full warranty terms and conditions can be found on the HYUNDAI POWER PRODUCTS website: www.hyundaipowerproducts.co.uk Manual Updates Our manuals are constantly being reviewed and updated. -
Page 61: Our Product Range
Our Product Range Generators Mini Dumpers Leisure Inverter, Petrol, Diesel And Built-In 4-Wheel Drive Mini Dumpers And Tracked Motorhome Generators Dumpers Pressure Washers Yard Sweeper Petrol, Diesel And Electric Pressure Washers Self Propelled Yard Sweeper Power Brush Water Pumps Scarifiers Submersible, Clean And Dirty Water And Petrol Lawn Scarifier And Aerator Professional Chemical Water Pumps... -
Page 62: Product Information
Product Information Information As soon as you have purchased the machine, we recommend that you fill out the following. If you need to contact an authorised dealer or customer service for information on servicing, you may need to provide the following information. The model number and serial number can be found on the grey specification sticker on your machine. -
Page 63: Contact Us
Need Help? Talk To Our Experts Contact Us Our friendly aftersales team will be more than happy to help you. Phone Call our team on 01646 687880, open Monday-Friday 8.30am-5pm. Email aftersales@hyundaipowerproducts.co.uk Online Live Chat Go to www.hyundaipowerproducts.co.uk Live chat is open Monday-Friday from 8.30am-5pm. Post Genpower Limited, Isaac Way, Pembroke Dock, Pembrokeshire, SA72 4RW, UK. - Page 64 Isaac Way, London Road, Pembroke Dock, UNITED KINGDOM, SA72 4RW T: +44 (0) 1646 687 880 F: +44 (0) 1646 686 198 E: info@hyundaipowerproducts.co.uk www.hyundaipowerproducts.co.uk Imported/Distributed by Genpower Ltd for The United Kingdom & Ireland Licensed by Hyundai Corporation, Korea...