Table of Contents
Advertisement
Maintenance
Cleaning
CAUTION - DO NOT use a hose pipe or pressure washer to clean the engine. Water can
!
damage the engine or contaminate the fuel system.
!
NOTE Engine must be switched off and spark plug lead disconnected.
After Each Use
• You must remove grass and mud from the machine to prevent it from drying. This will cause
problems the next time the machine is used.
• Wipe the machine down with a damp cloth.
• For larger build ups of debris, use a scraper or similar product.
• Dry the machine completely to prevent rust from forming.
• Make sure not to drip petrol onto the plastic parts to prevent damaging them and remove all
traces of spilt petrol immediately. The warranty will not cover damage to plastic parts caused by
petrol.
Regularly
• Paint on internal chassis parts may start to flake over time due to abrasive action of cut grass.
If this happens, you should touch-up with rust-proof paint to prevent rusting that could corrode
the metal. You can use a light spray oil such as WD40 on exposed parts and cutting deck to help
prevent rust.
• Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from
various types of commercial solvents and may be damaged by their use.
Transportation
Whenever the machine is to be handled, lifted, transported or tilted, you must:
1
Wear sturdy work gloves.
2
Hold the machine at the points that offer a safe grip, taking into account the weight and
relative distribution of the same.
3
Use an appropriate number of people for the weight of the machine and the characteristics of
the vehicle or the place where it must be placed or collected.
4
You must make sure that machine movements to not cause petrol leaks, damage or injuries.
5
During transport, make sure to fasten the machine securely with cables or straps.
6
The machine must be transported on a flat surface.
www.hyundaipowerproducts.co.uk
aftersales@hyundaipowerproducts.co.uk
01646 687 880
39
Advertisement
Table of Contents
