Table of Contents
Advertisement
Starting Procedure
Recoil Start
1
Make sure the blade is free of long grass and the cutting height is set to the highest setting.
From cold, pump the primer bulb 5 times. You do not need to do this for warm start. (Warm
2
start is when the machine has been turned off for less than 15-20 minutes). See image 1.
3
Pull the Operator Presence Control (OPC) lever back towards the main handlebar.
See image 2.
4
Gently pull the recoil start handle until you feel resistance, then pull swiftly until the
lawnmower starts. See image 3.
5
Hold the drive lever against the main handlebar and the mower will propel forward.
See image 4.
Image 1
Image 3
36
www.hyundaipowerproducts.co.uk
Image 2
Image 4
Drive Lever
01646 687 880
aftersales@hyundaipowerproducts.co.uk
OPC Lever
Advertisement
Table of Contents
