Preparation; Adding Oil; Checking Oil Level - Hyundai HYM430SPER Instruction Manual

Preparation

Adding Oil

Oil Type : SAE 30 or 15w40 Engine Oil
Oil Capacity : 600ml
NOTE - The machine is delivered without oil in the engine. All machines are tested and inspected
so there may be some residual oil left in the machine so please fill with caution.
1
Remove the oil filler cap.
2 Fill with fresh SAE 30 or 15W40 engine oil to the upper mark on the
dipstick. Stop occasionally to check the level. DO NOT overfill.
3
Once the correct amount of oil has been added, refit the dipstick securely.

Checking Oil Level

1
Remove the oil filler cap and wipe the dipstick clean.
2
Remove the dipstick and check the oil level. It should be up to the upper mark on the dipstick.
3
If the oil level is too low, add SAE 30 or 15W40 engine oil to the upper mark on the dipstick. DO
NOT overfill. The oil level should not be above the upper mark on the dipstick. If you do overfill,
read the 'Changing / Draining Oil' section below for more information on draining oil.
4 Once the correct amount of oil has been added, refit the dipstick securely.
30
www.hyundaipowerproducts.co.uk 01646 687 880 aftersales@hyundaipowerproducts.co.uk