HIKVISION HiLook PTZ-T5225I-A User Manual page 25

2. Choose the privacy mask number:
Steps:
(1) Move the cursor to MASK NO. and click IRIS+ to enter the editing mode.
(2) Click the up and down direction buttons to select a mask number for configuration.
(3) Click IRIS+ again to confirm and exit the editing mode.
3. Configure the position and size of the privacy mask.
Steps:
(1) Move the cursor to SET MASK and click IRIS+ button to enter the editing mode as shown in
the following figure. You can see the privacy mask on the live window.
(2) You can see ADJUST MASK POS message on the screen. Click the direction buttons to adjust
the position of the privacy blank to the designed scene.
(3) Click FOCUS+ button, and you can see ADJUST MASK SIZE message on the screen. Click the
up/down buttons to increase/decrease the height of the mask and click right/left buttons to
increase/decrease the width of the mask. Click IRIS+ button to save the settings and return
to the previous menu and you can see the mask turn to gray.
(4) To modify the configured mask, click IRIS+ button to enter the SET MASK menu and click
IRIS+ button again to edit.
The tilt range for configuring the privacy mask is from -15° to 60°.
4. Enable or disable the privacy blank function.
Move the cursor to MASK STATUS. Click IRIS+ button to enter the editing mode and click the up
and down direction buttons to set it ON or OFF.
HD-TVI Speed Dome User Manual
Figure 3-8 Privacy Mask Configuration Menu
Figure 3-9 Set the Privacy Mask
19