HIKVISION HiLook PTZ-T5225I-A User Manual page 23

(auto-tracking) and HAUTO (half-auto).
AUTO:
In Auto mode, the dome retains color balance automatically according to the current color
temperature.
INDOOR, OUTDOOR:
These two modes are for indoor use and outdoor use respectively.
SELFDEF:
In this mode, you can adjust the color temperature manually to meet your own demand.
In SELFDEF mode, you need to adjust the RED and BLUE values manually.
ATW:
In auto-tracking mode, white balance is continuously being adjusted in real-time according to
the color temperature of the scene illumination.
HAUTO:
Selecting this mode, the viewed image retains color balance automatically according to the
current color temperature.
Task 9: Configure the image flip.
If you turn the IMAGE FLIP function on, the image will be flipped diagonally along its central
axis, shown as the mirror reflection of the image.
Task 10 Configure focus limit
AUTO, 1 CM, 1 M, 3 M, 5 M and 20 M are selectable in FOCUS LIMIT. When set it as the AUTO, the
focus limit automatically adjusted according to the zoom limit.
Task 11: Configure the noise reduction.
To reduce the image noise, you can set the value of 2D DNR and 3D DNR respectively. The
greater the value is, the less the noise will be in the low illumination environment. You can also
disable the function by turning the value as OFF.
Task 12: Configure the image quality.
 MIN. ZOOM LIMIT
 Set the value of MIN. ZOOM LIMIT to limit the minimum zoom of the lens.
 The MIN. ZOOM LIMIT function is supported by certain speed dome model series.
 Chroma Suppress
Set the Chroma suppress value from 1 to 3 to suppress the color noise so as to get the clear and
high-quality image in the low luminance environment.
The Chroma Suppress function is supported by certain speed dome model series.
HD-TVI Speed Dome User Manual
17