Procom BD23T-6-LO Manual page 20

TO TURN OFF GAS TO APPLIANCE
Shut off heater
Turn Control Knob clockwise
MANUAL LIGHTING PROCEDURE
(Match light)
1. Remove screen by lifting and pulling forward.
2. Follow steps 1 through 5 under Lighting Instructions.
3. With Control Knob in PILOT position, strike match, and hold near pilot. Press in Control Knob; pilot should light.
4. Keep Control Knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release Control Knob.
5. Make sure the heater screen is in place before operating heater.
to the OFF position. Do not force.
Figure 21 Thermostatic Control Knob Position
20