Freestanding Electric Fireplace Installation Instructions and Homeowner’s Manual WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE. FOR YOUR SAFETY DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE VAPORS OR LIQUIDS IN THE VICINITY OF THIS OR ANY OTHER APPLIANCE...
Glass Information……………………………………………………………………….4 Maintenance of Motors…………………………………………………………………4 Electrical Wiring Diagram………………………………………………………………4 Operating Instructions……………………………………………………………………….5 On/Off Switch…………………………………………………………………………...5 Heater Control…………………………………………………………………………..5 Instructions for power…………………………………………………………………..5 Specifications………………………………………………………………………..….6 Replacement Parts List (V50TYLA-B – W or WM ) ………………………………………7 Replacement Parts Pictures…………………………………………………………...7、8 Replacement Parts List (V50TYLB-D)………………………………………………………9 Replacement Parts Pictures…………………………………….……………………9、10 Installing The Legs……………………………………………………………………………..11...
GENERAL Read all instructions before using this appliance. 13. Do not insert or allow foreign objects to enter any This appliance is hot when in use. To avoid burns, do ventilation or exhaust opening as this may cause not let bare skin touch hot surfaces. Keep electric shock, fire or damage to the appliance.
CLEARANCE TO COMBUSTIBLES WARNING: Electrical outlet wiring must comply with local building codes and all other applicable Back………………50.8mm regulations to reduce the risk of Sides……………..156.4mm fire, electrical shock and injury. Floor……………. . 0mm Top………………. .610mm WARNIGN: Do not use this fireplace if any part of it has been under water.
MAINTENANCE OF MOTORS GLASS INFORMATION The motors used on the fan and flame generator 1.Under no circumstances should this product be assembly are prelubricated for extended bearing operated with missing or broken glass. life and require no further lubrication. However, 2.
This section provides easy step by step instructions for operating your fireplace. 1. Make sure the unit is unplugged from the power source。 2. Plug the fireplace into a 10AMP/220V outlet. If the cord does not reach, you may use an extension cord rated for a minimum of 1900 watts.
SPECIFICATIONS: Model: V50TYLA-B Model: V50TYLA-W Voltage: 220V/50HZ Total Amps: 6.5A Voltage: 220V/50HZ Total Amps: 6.5A Total Watts: 1350W Heating Ratings: 1200W Total Watts: 1350W Heating Ratings: 1200W Dimensions, CM (H x W X D) Dimensions, CM (H x W X D) Fireplace 97x67x35.9...
INSTALLING THE LEGS ● Lay the heater down on its back and install the legs with care on the bottom panel as shown in Figure B (Make sure the vein side is facing forward). Figure B...
Page 13
For PRO-COM Electric Fireplace Models PRO-COM (Hereinafter referred to collectively as the “company”) warrants that your new fireplace is free from manufacturing and material defects for a period of one year from the date of installation, subject to the following conditions and limitations: This new PRO-COM product must be installed by a competent, authorized service contractor.
Need help?
Do you have a question about the V50TYLA-B and is the answer not in the manual?
Questions and answers