Connecting To Power Supply; Perform The Following To Connect The Tablet Computer To Ac Power; Kickstand Installation - Wetif IM133 Product Reference Manual

2.6 Connecting to Power Supply

The Tablet Computer operates either on external AC power or internal battery power. It is recommended to use AC
power when you start up the Tablet Computer for the first time.
Caution

2.6.1 Perform the following to connect the Tablet computer to AC Power:

1. On the side of the Tablet computer, lift the I/O protective cover by pulling on the latch
2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.
3. Plug the AC power cord into the AC adapter.
4. Finally, Plug the AC power cord into the electrical outlet.
When the AC Adapter is connected, the battery pack starts charging. The battery LED indicator on the tablet
computer would show different states. Please refer to description of LED indicator on Description of Parts.1.

2.7 Kickstand Installation

1. Turn the tablet computer over, so the back of the device is facing up.
2. Place the kickstand bracket with the screw holes in a line. (as the picture above)
3. Put the bracket cover on top of the kickstand screw holes.
4. Fasten all four screws on the bracket cover.
Use only the AC adapter included with your Tablet Computer. Using other AC
adapters may damage the Tablet Computer and the Battery.
2-7
IM133 User Guide