Using The Physical Function Keys (Hotkeys) - Wetif IM133 Product Reference Manual

IM133 User Guide

4.2 Using the physical function keys (Hotkeys)

The function key mapping menu option allows user to change the physical
function buttons, F1, F2 and F3. Users can change what application will be
launched with short press or long press of keys.
To configure function key mapping, perform the following:
1. Open the HotTab utility by press the
panel, OR launching the HotTab Utility application.
2. Tap on the Setting button.
3. Tap on function key icon for the corresponding key that you want to change.
4. At top of utility, it will say "Short Press" or "Long Press" to indicate what type
of press is being configured
5. You can switch what type of press you want to configure by tapping on the
"Short Press" or "Long Press" icon at the bottom of the utility window.
6. Pick from list of preset applications by tapping on the application icons OR
customize which application to execute using the picker.
Using the Custom picker:
1. Tap the icon to reveal browser window
2. Navigate to the desired executable to map to function key
3. Tap on "Done" to save selection.
To map the function key to another application:
1. Tap on the icon to remove connection to the original application, and
pick again tapping on
Using the physical function keys:
1. While operating the tablet, click on the physical function keys to activate
functions mapped via the setup in this section.
4-2
(Menu) Button located on the front
icon.