Using The Motosetting Application To Set The Symbologies - Wetif IM133 Product Reference Manual

IM133 User Guide

4.15 Using the MotoSetting Application to set the Symbologies

To set the Symbologies settings, the user can utilize the MotoSetting application that is installed on the tablet. Please
follow the instructions below:
Caution
1. Open HotTab utility by pressing
application.
2. Choose "Device ON/OFF" and then click on "Barcode"
3. Barcode utility will show up as below:
4. Tap on the ON button to turn on the Barcode Scanner.
5. Once the Barcode Scanner is ON, as shown below, tap on the "Disconnect" button.
To utilize the MotoSetting application, the user has to first turn on the Barcode
Scanner, and then disconnect the Barcode Scanner from the HotTab utility. This then
allows the MotoSetting application to gain control for user to set the Symobologies
as required. Once the desired settings are set, the user has to power cycle the
Barcode Utility in HotTab, before continuing to use the Barcode Scanner.
(Menu) Button located on the front panel, OR launching HotTab Utility

4-28