Table of Contents
Advertisement
User can also tap on the Settings button for further details settings.
Item
Description
Prefix
User can type in this field to define the characters BEFORE the data
scanned.
Suffix
User can type in this field to define the characters AFTER the data
scanned.
Append Enter
The check box user can defines to append an "Enter" which is followed by
the characters.
Append TAB
The check box user can defines to append an "TAB" which is followed by
the characters.
Regex Filter
Press on "Presets..." button, user can define how many characters to
show after the data scanned.
Replace
User can define specific characters to be replaced with preferred
characters automatically. When the characters defined in Regex
Substitution is scanned, the data will be replaced with the one filled in
Replace with.
Reset to default
User can remove all the set up and back to default mode.
SDK
For users following SDK for software porting, the scanned data can also be output with the
format needed.
Virtual COM
User can also choose Virtual COM to transfer scanned data to the defined COM port.
4-15
IM133 User Guide
Advertisement
Table of Contents
