Using The Wireless Lan (Wi-Fi) Feature; Using The Wireless Wan Feature - Wetif IM133 Product Reference Manual

4.4 Using the Wireless LAN (Wi-Fi) feature

To use the wireless LAN(Wi-Fi) feature to connect to the network, perform the following procedure:
1. Open the HotTab utility by press the
Utility application.
2. Tap on the Device button.
3. Check the status color of the Wi-Fi icon:
Item Status Color
Orange
White
4. If the Wi-Fi feature is disabled (white), tap on the Wi-Fi icon to enable it (orange).
5. Click the wireless network connection status icon in the Windows notification area. A list of available wireless
networks is displayed.
6. Double-click a network to connect to it. Provide required authentication information if needed.
7. To check the connection status, observe wireless network connection status icon in the Windows notification
area. The more bars the icon shows, the better the wireless LAN connection strength is.
8. Now wireless LAN connection is setup, try connection to the network with a internet browser such as Internet
Explorer.

4.5 Using the Wireless WAN feature

For tablets equipped with wireless WAN (3G or 4G/LTE) card, to use the wireless WAN feature to connect to the
network, perform the following procedure:
1. Open the HotTab utility by press the
Utility application.
2. Tap on the Device button.
3. Check the status color of the WWAN icon:
Item Status Color
Orange
White
4. If the WWAN feature is disabled (white), tap on the WWAN icon to enable it (orange).
5. You can check the wireless WAN connection status through the wireless network connection status icon in the
Windows notification area. The more bars encompassed, the better the signal is.
• For the Windows 7 operating system, you also can check the Access Connections gauge, the Access
Connections status icon, or the Access Connections wireless status icon in the Windows notification
area.
Note
(Menu) Button located on the front panel, OR launching the HotTab
Description
Wi-Fi is enabled.
Wi-Fi is disabled.
(Menu) Button located on the front panel, OR launching the HotTab
Description
WWAN (3G/4G) is enabled.
WWAN (3G/4G) is disabled.
4-7
IM133 User Guide