1. Manuals
  2. Brands
  3. Wetif Manuals
  4. Tablet
  5. RT-101
  6. User manual

Wetif RT-101 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RT-101
User's Manual

Advertisement

Table of Contents
loading

Related Manuals for Wetif RT-101

Summary of Contents for Wetif RT-101

  • Page 1 RT-101 User's Manual...
  • Page 2 TRADEMARKS Microsoft and the Windows logo are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation. The Bluetooth ®...

  • Page 3: Table Of Contents

    Table of Contents About This Manual Related Information ..................1 Conventions ....................1 Basic Safety Guidelines Intended Use ....................2 Maintenance and Operation Overview ............2 Safety ......................3 Electrical Hazards ..................3 Environmental ....................3 Radio Transmissions ..................4 Cleaning and Servicing .................4 Regulatory and Certification .................4 Lithium Battery Safety Statement ..............5 Chapter 1.
  • Page 4 Installing the MicroSD Card ................22 Removing the MicroSD Card ..............23 Using the Stylus ..................24 Removing the Protective Film from the Display ..........24 Chapter 3. Operation Opening the I/O Compartment Cover ............25 Closing the I/O Compartment Cover ............26 Connecting to External Cabling ..............27 Handstrap, Carrying Handle and Shoulder Strap ........30 Installing the Standard Battery ..............34 Removing the Standard Battery ..............35...

  • Page 5: About This Manual

    About This Manual The RT-101 User’s Manual provides instruction for qualified personnel to follow when setting up a new RT-101 device. This document is intended for use by qualified personnel to compliment the training and expertise, not to replace it.

  • Page 6: Basic Safety Guidelines

    The RT-101 is designed and manufactured according to strict controls and following the stated safety regulations. The following list identifies incorrect operating uses of the RT-101. Incorrect use of the RT-101 can lead to hardware damage, safety issues and possible risk to personnel health: The RT-101 is under operation by untrained personnel;...

  • Page 7: Safety

    Environmental Ambient Temperature The RT-101 operates on the basis of a passive cooling concept which internal waste heat is released via the housing surface and requires fresh airflow in the environment. „ Operating the RT-101 with no fresh cooling air may cause overheating and damage to the device.

  • Page 8: Radio Transmissions

    The operator is solely responsible for this type of operation. Radio Frequency Limited Locations Considering the radio frequency limitation in hospitals and aircraft, the RT-101 can only be installed with permission. Industrial computers may affect the function of implanted medical devices such as pacemakers and may cause malfunction.

  • Page 9: Lithium Battery Safety Statement

    „ Consult the dealer or an experienced radio/ TV technician for help. Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device is operation in 5.15 – 5.25GHz frequency range, then restricted in indoor use only, Outdoor operations in the 5.15 –...

  • Page 11: Chapter 1. Introduction

    Android™ 4.4 (by request) About This Guide The RT-101 User Manual provides instruction for qualified personnel to use as a guide for setup of the device. This document is not intended to replace the training and expertise of the end- user.
  • Page 12 Introduction Item Description Dimensions (W x H x L) 280 mm (11”) x 23 mm (0.9”) x 195 mm (7.7”) Weight 1.33 kg (2.93 lbs) Wireless WLAN Wi-Fi IEEE 802.11 a/b/g/n/ac Bluetooth Bluetooth V4.0 WWAN (Optional) Optional for 3.5G or 4G LTE Sensor Sensor Gyroscope, G sensor, E-compass, Light sensor...

  • Page 13: Rt-101 Configuration Options

    -20°C (-4°F) to 50°C (122°F) Range Storage Temperature -30°C (-22°F) to 70°C (158°F) Range Humidity 5-95% without condensation RT-101 Configuration Options following options are available for the RT-101: „ NFC module „ Barcode reader „ Smart card reader „ High capacity battery „...

  • Page 14: Parts List

    Introduction Parts List The RT-101 is shipped with the following items. All other accessories are sold and ordered separately. For help, contact your local sales representative. See “Contacting” on page 50. RT-101 Power Adapter Stylus 2-Point Carrying Handle Hitch D-rings...

  • Page 15: Identifying The Device

    Introduction Identifying the Device Overview Figure 1. Overview Table 2. Overview Item Description See “Side View” on page 14 for further information. Left view See “Front View” on page 12 for further information. Front view See “Rear View” on page 15 for further information. Rear view See “Side View”...
  • Page 16 Windows 8 home key. ® Volume + Volume increase. Volume - Volume decrease. Turns the RT-101 on or off. Power key Power LED The power LED lights when the device is on. F2 key Programmable function key. F1 key Programmable function key.
  • Page 17 Bottom View Figure 3. Bottom View Table 5. Bottom View Item Description Docking connector 12 pin connector for docking onto a station. Lock the RT-101 to a stationary object for security. Kensington lock Pass-through Dual pass-through for WLAN, GNSS and WWAN.
  • Page 18 Connect USB devices to the RT-101. USB 3.0 Audio jack Connect a 3.5 mm jack for a headphone or external speakers. Connect the RT-101 to an Ethernet (RJ-45) cable. Ethernet DC-IN jack Insert power connector to charge battery. Connect the RT-101 to a serial device.
  • Page 19 Introduction Rear View Figure 5. Rear View Table 7. Rear View Item Description Battery To install a battery, an external battery is optional. Rear camera 5.0 Mega-Pixels camera with LED auxiliary light. Barcode reader For installing a barcode reader (Optional). NFC sensing area For detecting NFC devices.

  • Page 20: Dimensions

    Introduction Dimensions The following image lists the device dimensions without add-ons (mm/inches). 280 / 11 28 / 11 Figure 6. Front View Dimensions 23 / 0.9 2.3 / 0.9 Figure 7. Side View Dimensions...

  • Page 21: Touch Screen Features

    Introduction Touch Screen Features Always use the point of the stylus for clicking or making strokes on the touch screen. Never use an actual pen, pencil, or sharp/abrasive object on the touch screen. The stylus is used as if it were a pen or pencil. Touch the screen with the tip of the stylus then remove the stylus from the screen.

  • Page 22: Chapter 2. Getting Started

    Getting Started Chapter 2. Getting Started This section provides an outline of the steps necessary to setup a new RT-101. A detailed guide follows the listed items, see as follows. For additional technical assistance, contact your sales representative. See “Contacting”...

  • Page 23: Powering The Device On And Off

    Powering the Device On and Off Powering On the Device Only power on the RT-101 after connecting all of the peripherals and cabling. Press and hold the power button until the screen lights. The device runs through the start up sequence and powers up.

  • Page 24: Installing The Micro Sim Card

    Check with your network or cellular service provider for availability and cost rates. Power off the RT-101. See “Powering Off the Device” on page 20. Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page Locate the micro SIM slot in the left I/O parts.

  • Page 25: Removing The Micro Sim Card

    Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page Removing the Micro SIM Card Power off the RT-101. See “Powering Off the Device” on page 20. Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page Locate the micro SIM slot in the left I/O parts.

  • Page 26: Installing The Microsd Card

    Getting Started Press the micro SIM card in and release it. The card springs out. Grasp the micro SIM card and remove it from the slot. Figure 16. Removing the Micro SIM Card Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page Installing the MicroSD Card The device supports microSD card for easier data storage.

  • Page 27: Removing The Microsd Card

    Getting Started The microSD card has a beveled edge. Align the microSD card with the slot making sure that the corners match. Insert the microSD card and press it in until an audible click sounds. Figure 18. Installing the MicroSD Card Close the left I/O compartment cover.

  • Page 28: Using The Stylus

    Removing the Protective Film from the Display The front display of the RT-101 is protected during transport by a transparent film. This film should remain on the front display during assembly to avoid damage to the front display surface.

  • Page 29: Chapter 3. Operation

    Operation Chapter 3. Operation Opening the I/O Compartment Cover Place the device display side down on a clean work surface. Locate the I/O compartment cover. Left view Right view Left I/O Right I/O Compartment Compartment Cover Cover Left I/O Compartment Cover Figure 22.

  • Page 30: Closing The I/O Compartment Cover

    Operation Closing the I/O Compartment Cover Place the device display side down on a clean work surface. Locate the I/O compartment cover. Left view Right view Left I/O Right I/O Compartment Compartment Cover Cover Left I/O Compartment Cover Figure 25. Side View: Locating the I/O Compartment Cover Flip the I/O compartment cover and install.

  • Page 31: Connecting To External Cabling

    Connect USB Cabling The RT-101 have one USB 3.0 and one USB 2.0 ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. The USB ports support USB 2.0 or USB 3.0 devices.
  • Page 32 Operation Connect Ethernet Cabling The RT-101 provide have a Ethernet port for connecting Ethernet. Use a shielded cable is required to maintain emissions and susceptibility compliance. Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page Connect LAN cable to Ethernet port on the RT-101.
  • Page 33 Connect to HDMI devices via micro HDMI cable. Open the left I/O compartment cover. See “Opening the I/O Compartment Cover” on page Connect micro HDMI cable to micro HDMI port on the RT-101. Figure 32. Connect Micro HDMI Cabling Connect RS-232 Cabling Connect to RS-232 devices via RS-232 cable.

  • Page 34: Handstrap, Carrying Handle And Shoulder Strap

    Operation Handstrap, Carrying Handle and Shoulder Strap The RT-101 is equipped with a handstrap, a carrying handle and a shoulder strap for convenience and choice. Select the accessory that is right for your needs. The handstrap can be installed with either the shoulder strap or the carrying handle. However, the handle and shoulder strap can not be installed together due to space constraints.
  • Page 35 Operation Connect the handstrap on the D-rings. When the handstrap is installed, the stylus can be placed under the strap. Figure 36. Connecting the Handstrap Removing the Handstrap Unlock the handstrap from the D-rings. Figure 37. Removing the Handstrap Remove the D-rings. Figure 38.
  • Page 36 Operation Secure the bumper and the RT-101 with screws. Figure 39. Securing the Screws Connecting the Carrying Handle Attach the clips to the metal loop on the bumper. Metal Loop Figure 40. Connecting the Carrying Handle Removing the Carrying Handle Press in the clips to release them from the metal loop.
  • Page 37 Operation Connecting the Shoulder Strap Attach the clips to the metal loop on the bumper. Metal Loop Figure 42. Connecting the Shoulder Strap Removing the Shoulder Strap Press in the clips to release them from the metal loop. Remove the clips. Metal Loop Figure 43.

  • Page 38: Installing The Standard Battery

    Operation Installing the Standard Battery The following instructions are for both standard and external batteries. The external battery is an optional component. Only use components specifically designed for this device. Contact your local representative for ordering information. Make sure the power switch is switched to ON before installing the standard/external battery.

  • Page 39: Removing The Standard Battery

    Operation Slide the locking switch on the top-left side to lock the battery. Figure 46. Locking the Battery Make sure the latch is securely locked to prevent the battery from falling. Removing the Standard Battery Place the device display side down on a clean work surface. Locate the battery.

  • Page 40: Connecting To A Wireless Network

    Figure 49. Removing the Battery Connecting to a Wireless Network Before you can make use of the RT-101 wireless functions, you need to connect to a network. The following is a set of procedures for connecting to a wireless network.

  • Page 41: Chapter 4. Using Bios Setup Utility

    To run the BIOS Setup Utility, use the following procedures: Perform one of the following: If the RT-101 is powered off „ Press the Power button to start up the device. The power LED lights. Quickly press and hold the Windows Home key until the BIOS Post screen displays.

  • Page 42: Installation An Operating System

    Using BIOS Setup Utility Due to the device’s fast boot up and boot down time, there is only a small time frame of a few seconds between the release of the Power button and the opportunity to press the Windows Home key.
  • Page 43 Using BIOS Setup Utility Tap Yes to enable CSM support. Figure 52. Main > Boot Features „ Step 2 Enable Legacy Boot Access the BIOS Setup Utility, see “Accessing the BIOS Setup Utility” on page 37. Navigate to APP Menu > Main > Boot Features. Locate the Legacy Boot setting and tap on the menu to select On enable legacy boot.
  • Page 44 Using BIOS Setup Utility Tap USB 2.0 from the menu list. USB 2.0 is now enabled for the device. Figure 54. Advanced > Miscellaneous Configuration „ Step 4: Advanced > Miscellaneous Configuration „ Save the Settings After you configure BIOS, you will need to save the settings. Navigate to APP Menu >...

  • Page 45: Bios Passwords

    Using BIOS Setup Utility BIOS Passwords Setting Up a Supervisor Password To setup a supervisor password, follow the procedure as described: Go to APP Menu > Security > Account’s Password Status. Tap the Enter icon next to Setup the Supervisor Password to access the virtual keyboard. Figure 56.
  • Page 46 Using BIOS Setup Utility Verification of the password is required. Tap the same password again and tap Enter to confirm the new password. Navigate to APP Menu > Exit. Figure 58. Exit Screen Tap Exit Saving Changes to display the confirmation screen. Tap Yes to save the new configuration settings.

  • Page 47: Ec And Bios

    Contact your technical sales or technical representative to obtain the correct BIOS file. Copy the BIOS file on to the USB device. Connect the USB device to one of the device’s USB ports and power on the RT-101. A USB keyboard is required for entering command.
  • Page 48 Using BIOS Setup Utility Tap Change PC settings. Figure 60. Change PC Settings From the PC settings menu, tap Update and recovery to continue. Figure 61. Update and Recovery...
  • Page 49 Using BIOS Setup Utility From the Update and recovery screen, tap Recovery. The Advanced startup option displays. Figure 62. Recovery Under Advanced startup, tap Restart now. Figure 63. Restart Now...
  • Page 50 Figure 64. Use a Device 11. From the Use a device menu, tap Internal Shell to open the command screen. Make sure connect the RT-101 to the AC adapter to prevent a sudden loss of power. Figure 65. Internal Shell...
  • Page 51 The BIOS is now updated. Updating EC Connect the RT-101 to the AC adapter to prevent a sudden loss of power. Updating EC requires the use of the Internal Shell Command menu, refer to steps 1 to 12 of “Updating BIOS”.

  • Page 52: Chapter 5. Troubleshooting

    Troubleshooting Chapter 5. Troubleshooting Use the troubleshooting tables in this section to fix problems with the Wi-Fi connection, 802.1x security, or general problems with operating the computer. If you send the computer in for service, it is your responsibility to save the computer data and configuration.

  • Page 53: Troubleshoot Operating The Computer

    Troubleshooting Troubleshoot Operating the Computer Use this section to troubleshoot problems that may prevent you from being able to operate the computer. You press the Power button and nothing happens. Make sure that power is connected to the computer. The computer appears to be locked and you cannot enter data. Restart the computer.

  • Page 54: Chapter 6. Maintenance

    Prevent using any kind of chemical solvent, acidic or alkali solution. Returning the Device Please put the contents in the original package gently when you need to return the RT-101. Contacting If you experience technical difficulties, please consult your distributor or contact the...

Table of Contents