Wetif IM133 Product Reference Manual page 58

10. The right panel shows any status change in the symbologies settings, as shown below:
11. On the left panel, scroll to the top, scroll to the top, the user can also change the symbologies settings to default
setting:
12. Once the user is done setting the symbologies, close the MotoSetting by clicking on the X on the top right, and
then go back to the HotTab utility.
13. Open HotTab utility again by pressing
application.
14. Choose "Device ON/OFF" and then click on "Barcode"

(Menu) Button located on the front panel, OR launching HotTab Utility
4-31
IM133 User Guide