Changing The Touchscreen Modes - Wetif IM133 Product Reference Manual

4.3 Changing the Touchscreen modes

The tablet's advanced capacitive touchscreen has 3 built-in operating modes, for users to choose under different
usage scenarios:
Mode Usage Scenario
The Hand/Rain mode is the default operating mode of the touchscreen. Under this mode,
the touchscreen is set to have the ability to reject false touch inputs while liquid is present on
the touchscreen. Once the liquid is removed from the touchscreen, touch inputs from bare
fingertips will continue to operate.
Hand/Rain Mode
Under the Stylus mode, the touchscreen is set to have the ability to pick up touch inputs from
the fine-tip passive capacitive stylus that is shipped with the tablet. Touch inputs from bare
fingertips will also continue to operate.
Stylus Mode
Under the Glove mode, the touchscreen is set to have the ability to pick up touch inputs while
the user is operating the touchscreen with gloves on. Touch inputs from bare fingertips will
also continue to operate.
Glove Mode
There are 2 ways to switch between the different touchscreen operating modes:
1. Via the built-in HotTab utility
2. Via the programmable function buttons
Switch touchscreen modes via the built-in HotTab utility:
To switch between the different touchscreen modes via the HotTab utility, perform the following procedure:
1. Open HotTab utility by pressing
application.
2. Choose "Device ON/OFF"and then click on "Touch Set" icon

(Menu) Button located on the front panel, OR launching HotTab Utility
4-3
IM133 User Guide