Table of Contents
Advertisement
IM133 User Guide
4.10 Using the Barcode Reader Feature
To enable the Barcode Reader feature, perform the following procedure:
1. Open HotTab utility by pressing
application.
2. Choose "Device ON/OFF" and click on "Barcode", and the setting utility will show up as below:
3. Tap on the ON button.
4. Check the status color of the ON button is green, and the status color of the Barcode icon on the HotTab menu
is orange at the same time.
Item
Status Color
Orange
White
5. Open the application where barcode reader will be displaying the scanned barcode.
6. Trigger the barcode reader by pressing Fn2 function key. (User Programmable)
(Menu) Button located on the front panel, OR launching HotTab Utility
Description
Barcode Reader is enabled. Reading will need to be
triggered manually thru Fn button.
Barcode Reader is disabled.
4-12
Advertisement
Table of Contents
