Table of Contents
Advertisement
IM133 User Guide
2.4.2 Insert Battery Pack
To insert the included standard battery pack into the Tablet Computer:
1. Disconect any cords connected to the tablet computer
2. Turn the tablet computer over, back facing up.
3. Locate the Battery Lock Latch and push it to the "Unlocked" position.
4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
5. Insert the battery on the connector-pins side first, and then lower the battery into the battery compartment.
Continue to hold the Battery Release Slider before battery is fully inserted.
6. Make sure the battery is completely lowered into the compartment before letting go the Battery Release Slider.
Battery will be flat against the housing once fully inserted
2.4.3 Remove Battery Pack
1. Shut down the tablet computer (or put it to sleep). Discconect any cords connected to the computer.
2. Turn the tablet computer over, back facing up.
3. Locate the Battery Lock Latch and push it to the "Unlocked" position.
4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
5. Lift the battery out using the opening on side of battery compartment.
2.5 Using Hot Swappable Battery Feature
The tablet computer supports hot-swapping of batteries, meaning the tablet does not need to be powered off in order
to replace the mainbattery. To support such mechanism, there is a backup battery inside the tablet that is charged up
with the main battery. This backup battery cannot be removed, and needs to have adequate power for hot swapping
of main battery to be done without issue. When the backup battery is fully charged, it can sustain up to 5 minutes of
runtime to allow for battery hot-swapping.
2.5.1 Perform the following to hot swap the batteries:
1. While the tablet is powered on, go to HotTab utility to check on the power level of the Backup battery.
2. If the Backup battery level is at "Low", please charge the tablet with AC Power until the Backup battery level is at
"Medium" or "High", and do not remove the main battery.
3. If the Backup battery level is at "Medium" or "High", remove the main battery.
4. Insert a new charged battery into the battery compartment.
2-6
Advertisement
Table of Contents
