Table of Contents
Advertisement
IM133 User Guide
4.11.1 Trigger Setting
Item
Description
Auto Scan
The default setting for RFID trigger is Auto Scan. Under this setting, the RFID Reader will
always be ready to scan tags.
1. When the RFID tag is detected from RFID antenna, the data will be read automatically.
2. User can define the RFID scanning frequency from the drop-down menu shown as below.
Single Scan
User can also define the RFID Reader scanning as Single Scan. Under this setting, the RFID
Reader will be triggered only when user click on "Send".
The frequency can be from 1 second to 9 seconds.
4-18
Advertisement
Table of Contents
