Table of Contents
Advertisement
Note: this procedure resets the factory default settings (see part
9). The Master code will be 1234, Service code 6060 and all
user codes, wireless detectors & controllers will be forgotten. If
there is built-in JA-65X communicator all telephone numbers for
voice message and Pager dialing will be erased. The reset will
not erase event memory and information about the reset will be
recorded there. The RESET pins can also be used to enroll a
JA-60F wireless keypad (see 9.1).
Warning: if the Master code is forgotten when reset is disabled
(with sequence 280), the control panel reset will be possible only
by the manufacturer.
12 PC used with JA-63
The JA-63 system can be connected to a Personal Computer
(PC), using the PC-60A interface cable. Comlink software is
designed for the Windows system.
"virtual" control panel access & complete events list
programming dialogs
JA-63 „PROFI" Alarm System
User can check and operate the JA-63 system easily via their
PC, can read complete events memory with all details, can view
the map of the installation (seeing topical triggering of the
detectors) etc. However, the user can not change settings of the
system.
Installer who has access rights can program the system, can
check the communication quality of the items, can view the level
of interference in the location etc. There is also a convenient
tool to make a map of the installation, which includes a library of
components.
Depending on your access rights, the Comlink software will
allow you to open the corresponding screens (see following
examples). There is a comprehensive help file in the Comlink
program.
item testing window & RF signal oscilloscope
map of the system (shows current conditions in the
- 15 -
house)
MGK55402
Advertisement
Table of Contents
