Table of Contents
Advertisement
6
User Manual
The device can be configured via the display module as well as the HART protocol. The
following pages describe operation and configuration of the device using the display module.
An overview of the menue structure can be found on the last page of this document.
6.1
Basics of the Operating Concept
The display module consists of a dot-matrix
display with 80x128 pixels as well as a
4-button control panel.
The four buttons below the display allow an
intuitive operation of the device. The gen-
eral functionality of the buttons is identical in
all operating modes.
If you press and hold the up or down button, it will automatically be triggered multiple times.
This allows to easily navigate through longer selection lists. If you press and hold the ESC
button, you always return to the measured value display.
Button
Function
/
Select function, increase/decrease value
OK
Confirm selected function or selected value
ESC
Cancel action
ESC long
Return to measured value display
The structure of the display is the same in every operating mode. The display area is divided
into three zones:
Header
Icon indicating device status
Data area
BA_080_en_2022-01_11.02 Pressure transmitter PASCAL CV4
Table 1: General button functions
Figure 3: Display structure
Figure 2: Control elements
Header
Icon
Data area
Page 6/24
Advertisement
Table of Contents
