Table of Contents
Advertisement
de Cleaning and care
Insert the maintenance flap and
6th
snap into place.
1
Close the maintenance hatch.
7th
17.6 Clean the inlet opening in
the rubber sleeve.
gene
Regularly check the inlet opening in
the rubber sleeve for blockages and
clean the inlet opening.
Open door.
1.
Check the inlet opening for
2.
blockages and remove any
blockages.
Note: Do not use any pointed or
sharp objects.
62
2
17.7 Clean the water drainage
hose on the siphon
If the water drainage hose on the
siphon is dirty or the detergent
solution is not pumped out, you must
clean it.
Switch off the device.
1.
Disconnect the device's power plug
2.
from the power supply.
Loosen the hose clamp and
3.
carefully pull off the water
drainage hose.
Residual water can run out.
Clean the water drainage hose
4th
and the siphon socket.
Advertisement
Table of Contents
