Connecting Your Appliance To The Home Connect App; Connecting The Appliance To The Energy Manager - Bosch WAV28KH1BY User Manual And Installation Instructions

Open the Home Connect app on
5.
your mobile device and carry out
the steps in the app.
In the Home Connect app, enter
6.
the network name (SSID) and
password (key) for your home net-
work.
Carry out the steps in the
7.
Home Connect app to connect the
appliance.
a If the display shows con and
lights up permanently, the appli-
ance is connected to the home
network.
If the display shows Err, the appli-
8.
ance is not connected to the home
network.
Check whether your appliance is
‒
in range of your home network.
Reconnect the appliance to the
‒
WLAN home network (Wi-Fi)
with WPS function.
Connect your appliance to the
9.
Home Connect app → Page 45.
16.4 Connecting your appli-
ance to the Home Con-
nect app
Requirements
¡ The appliance is connected to the
WLAN home network (Wi-Fi).
¡ The Home Connect app is open
and you have logged on.
Set the programme to position 3.
1.
a The display shows APP .
Press ⁠ Start / Reload.
2.
a The appliance connects to the
Home Connect app.
Once your appliance is displayed
3.
in the Home Connect app, carry
out the last steps in the
Home Connect app.
a If the display shows con, the appli-
ance is connected to the
Home Connect app.
16.5 Connecting the appli-
ance to the energy man-
ager
If you connect the appliance to the
smart energy system (energy man-
ager), you will optimise your energy
consumption. The appliance starts
only when your home photovoltaic
system can provide sufficient energy
or the energy tariff is good.
Requirements
¡ The smart energy system (energy
manager) must use the EEBus Initi-
ative communications standard.
¡ You have read about how to con-
nect your appliance to the smart
energy system (energy manager)
in the instruction manual for the
smart energy system (energy man-
ager).
Press and hold Remote Start ⁠
1.
for approx. 3 seconds.
a The display shows Aut .
Set the programme to position 7.
2.
a The display shows EnG .
Press ⁠ Start / Reload.
3.
a The appliance is connected to the
smart energy system (energy man-
ager).
Home Connect en
45