Eiki EK-351WST Owner's Manual page 38

System
The projector automatically tunes to various types of computers with its function of Multi-scan system
and Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically de-
tects the signal format and tunes to project proper images without any additional setting.
One of the following messages may ap-
pear when input source as computer:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu
box and the Auto PC Adj. function
works to display proper images. If
the image is not projected properly,
a manual adjustment is required.
There is no signal input from computer.
-----
Check the connection between the
computer and projector.
When input source as VIDEO or S-Video
Auto
The projector may auto detect the input video
system and adjust to the optimum status. For
PAL-M or PAL-N video system, select the sys-
tem manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/
PAL-N
If image cannot be displayed correctly, you may
need to select one from PAL, SECAM, NTSC,
NTSC 4.43, PAL-M and PAL-N for playing.
Note:
● When HDMI, Component, HDBaseT, Network or USB display is selected, System menu for
computer is disable.
38
OSD setting-Display
System menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
System for computer signal
Display
System
1024 x 768, 60Hz
----
----
----
----
----
VIDEO or S-Video system menu
Display
System
Auto
PAL
SECAM
NTSC
NTSC4.43
PAL-M
PAL-N
PAL-60
17
0
0
0
Normal
Front
Center
Blue
1024 x 768, 60Hz