Connect The Ac Power Cord - Eiki EK-351WST Owner's Manual

Connect the AC power cord

Standard voltage employed by the projector is AC 100-240V. It adapts to different input voltage
automatically. The projector employs 2-phase power cord with neutral ground cable.
Do not use any other type of power cords or you may
face the risks of electric shock. In case you have any
doubt on type of power cord you are using, please call
authorized dealer or service center for help. Before
powering on the projector, get all external equipment
connected in advance.
Note:
Keep the AC power socket close to the pro-
jector for easy plugging and unplugging.
Note:
For safety reasons, unplug the AC power
cord when the projector is not in use. The
projector will consume a small amount
of power when it is connected to AC grid
power and in standby mode.
Precautions on power cord
The AC power cord should meet regulations of the country/district where the projector is used.
Please make sure the type of the power plug is compliant with those given in figure below.
Make sure you are using a valid AC power cord.
In case the included AC power cord does not comply with the AC power socket in the location,
call the dealer for replacement.
The projector side
Connect to power cord connector of
the projector
Note:
● Use of invalid power cord may hamper product performance or even lead to electric
shock, fire, and other incidents. Please use power cord compliant with the included one
to ensure product performance and operation safety.
● The frequently used cables are: AC power cord, VGA cable, audio cable, video cable,
and RS232 control cable.
24
Connection to equipment
Connect included
AC power cord to the
projector.
Connect to the AC power socket
Grounding end
Connect to AC power socket