Customization Basics; Refrigerator Location - Monogram ZIRS360NHLH Installation Instructions Manual

Design Guide - Standard Installation

CUSTOMIZATION BASICS:

Framed or Overlay Panels, Custom
Handles and Accessory Kits
Trimmed models are designed to be customized with
decorative panels. Field installed custom door and
grille panels are required.
Optional Accessory Kits
• ZKHSS2: Monogram Tubular Stainless Steel
handles designed to fit 3/4" overlay panels.
• ZKHPSS1: Pro Tubular Stainless Steel handle
designed to fit 3/4" overlay panels.
• ZUG2: For side-by-side installation of two trimmed
models. This kit provides for the installation of a
unified custom grille panel to span the width of two
units using a framed or overlay panel.

REFRIGERATOR LOCATION

• Do not install the refrigerator where the tempera-
ture will go below 55°F (13°C). It will not run often
enough to maintain proper temperatures.
• Do not install the refrigerator where temperatures
will go above 100°F (37°C). It will not perform
properly.
• Do not install the refrigerator in a location
exposed to water (rain, etc.) or direct sunlight.
• Install it on a floor strong enough to support it
fully loaded.
8
31-49140