Advanced Settings - HIKVISION DS-2TD4136T-25 User Manual

User Manual of Thermal Network Speed dome
82

7.1.2 Advanced Settings

Configuring SNMP Settings
Purpose:
You can use SNMP to get speed dome status and parameters related information.
Before you start:
Before setting the SNMP, please use the SNMP software and manage to receive the speed
dome information via SNMP port. By setting the Trap Address, the speed dome can send
the alarm event and exception messages to the surveillance center.
The SNMP version you select should be the same as that of the SNMP software.
Steps:
1. Enter the SNMP settings interface:
Configuration > Network > Advanced Settings > SNMP
Figure 7-10 SNMP Settings
2. Check the corresponding version checkbox (Enable SNMP v1, Enable SNMP v2c,
© Hikvision