HIKVISION DS-2TD4136T-25 User Manual page 20

User Manual of Thermal Network Speed dome
Figure 2-12 Accessing the Speed dome with Dynamic IP
The obtained IP address is dynamically assigned via PPPoE, so the IP address always
changes after rebooting the speed dome. To solve the inconvenience of the dynamic IP,
you need to get a domain name from the DDNS provider (E.g. DynDns.com). Please
follow below steps for normal domain name resolution and private domain name
resolution to solve the problem.
Normal Domain Name Resolution

Steps:
1. Apply a domain name from a domain name provider.
2. Configure the DDNS settings in the DDNS Settings interface of the network speed
dome. Refer to Section 7.1.1 Configuring DDNS Settings for detailed configuration.
3. Visit the speed dome via the applied domain name.
Private Domain Name Resolution

© Hikvision
Figure 2-13 Normal Domain Name Resolution
Figure 2-14 Private Domain Name Resolution
12