User Management - HIKVISION DS-2TD4136T-25 User Manual

User Manual of Thermal Network Speed dome
(3) Click OK to finish modifying.
Delete an IP Address

Left-click an IP address from filter list and click Delete.
Delete all IP Addresses

Click Clear to delete all the IP addresses.
5. Click
Configure Security Service Settings
Steps:
1. Enter the Security Service interface:
Configuration> System > Security > Security Service
2. Check the checkbox to enable the SSH function.
Enable SSH: Enabling SSH (Secure Shell) function is to encrypt and compress the
data and to reduce the transmission time.
3. Check the checkbox to enable the Illegal Login Lock function.
Illegal Login Lock: Enabling illegal login lock function is to automatically lock the
device IP after the admin user performing 7 failed password attempts (5 attempts for
the user/operator).
4. Click

7.5.4 User Management

Enter the User Management interface:
Configuration > System > User Management
The admin user has access to create, modify or delete other accounts. Up to 32 user
accounts can be created.
© Hikvision
Figure 7-73 Modify an IP
to save the settings.
to save the settings.
128