HIKVISION DS-2TD4136T-25 User Manual page 93

User Manual of Thermal Network Speed dome
2. Configure the following settings:
Sender: The name of the email sender.
Sender's Address: The email address of the sender.
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
SMTP Port: The SMTP port. The default TCP/IP port for SMTP is 25.
E-mail encryption: None, SSL, and TLS are selectable. When you select SSL or TLS and
disable STARTTLS, e-mails will be sent after encrypted by SSL or TLS. The SMTP port
should be set as 465 for this encryption method. When you select SSL or TLS and
enable STARTTLS, emails will be sent after encrypted by STARTTLS, and the SMTP
port should be set as 25.
STARTTLS protocol must be supported by the email server for e-mail encryption with
STARTTLS. When it is not supported by the email server and the checkbox of Enable
STARTTLS is checked, the email will not be encrypted.
Attached Image: Check the checkbox of Attached Image if you want to send emails
with attached alarm images.
Interval: The interval refers to the time between two actions of sending attached
pictures.
Authentication (optional): If your email server requires authentication, check this
checkbox to use authentication to log in to this server and enter the login user name
and password.
For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and network
devices. The password should be something of your own choosing (using a
minimum of 8 characters, including upper case letters, lower case letters, numbers
and special characters) in order to increase the security of your product.
© Hikvision
Figure 7-14 Email Settings
85