User Manual of Thermal Network Speed dome
2. Check the checkbox to enable the VCA resource type.
3. The system reboots and the selected VCA resource will be enabled.
Once you select any of the resources, the other VCA rules cannot be enabled.
7.5.3 Security
Configuring Authentication Security
Purpose:
You can specifically secure the stream data of live view.
Steps:
1. Enter the Authentication interface:
Configuration> System> Security > Authentication
2. Set the authentication mode for each authentication type.
RTSP Authentication: Select the authentication mode as basic or disable in the
dropdown list to enable or disable the RTSP authentication.
3. Click
Configuring IP Address Filter
Purpose:
With this function on, the camera allows certain IP addresses whether to log in or not.
Steps:
1. Enter IP Address Filter interface:
Configuration > System > Security > IP Address Filter
© Hikvision
to save the settings.
126