Camera Mode - Mio MiVue 798 User Manual

In the Parking mode, parking recordings could be triggered only when movements
or vibrations are detected. The parking recording will save the duration from seconds
before the event until seconds after the event. When your memory card fills up with
parking recordings, it will automatically record over the oldest existing files in this
category.
Note:
You can press
l
The parking recording is triggered by the G sensor and motion detection of the device. You can
l
change the configuration by selecting
Sensitivity.
The rear camera (optional) does not support motion detection.
l
To exit the Parking mode and resume continuous recording, press
movements are detected and recorded during the Parking mode, you will be asked
to playback the video when you exit the Parking mode.
The parking recordings can be found in the "Parking" category for file playback.

Camera mode

The dash cam allows you to take a photo.
If the recording is in progress, press
l
available when the rear camera is connected.)
Press > Camera >
l
The photos can be found in the "Photo" category for file playback.
to manually enter the Parking mode while continuous recording is in progress.
.
> Parking mode > Motion Detection and G-Sensor
to take a photo. (This function is not
13
. If