Table of Contents
Advertisement
www.ti.com
5.2.3
Install the ADS8688EVM-PDK Software
The ADS8688EVM software must be installed on the computer. This software supports the ADS688EVM-
PDK. The user must have administrator privileges to install the EVM software. The following steps list the
directions to install the software.
1. Open the Windows explorer and locate the microSD memory card labeled ADS8688EVM in the
browser as a removable storage device.
2. Navigate to the ...\ADS868xEVMGUI\Version x.x\Volume\ folder.
3. Run the installer by double-clicking the setup.exe file. This action installs the EVM GUI software and
the required and Simple Capture card device driver components.
4. After the installer begins, a welcome screen displays. Click Next to continue.
5. A prompt appears with the destination directory; select the default directory under: ...\Program
Files(x86)\Texas Instruments\ADS8684_8 EVM GUI\ as shown in
6. One or more software license agreements appear. Select the I Accept the License Agreement radial
button and click Next.
SBAU230A – August 2014 – Revised December 2014
Submit Documentation Feedback
Figure 9. Destination Directory Screen
Figure 10. License Agreement Screen
Copyright © 2014, Texas Instruments Incorporated
ADS8688EVM-PDK Initial Setup
Figure 9
and
Figure
10.
ADS8688EVM-PDK Evaluation Module
15
Advertisement
Table of Contents
